Fullex operates a fully accredited UKAS testing facility which has been operating for over 10 years. We can perform tests to the following specifications
- PAS23 - General performance requirements for single leaf external doors
- PAS24 - Enhanced security requirements for door assemblies
- BS7950 - Enhanced security performance of casement and tilt/turn windows for domestic applications
We test products from all door and hardware manufacturers, working closely with 'Secured by Design' and our test results are accepted by BSI, BBA, BRE and Q-MARK, as part of their own certification procedures
With over 10 years of experience behind them our technical staff are available as development consultants. Their advice and recommendations can be obtained on one of our Indicative Testing Days. Contact Fullex testing using the details below for more information on both our advisory and testing services.
Fullex Testing Services
Building 18, First Avenue
The Pensnett Estate
Kingswinford
West Midland
DY6 7NA
| Dirct Direct: | +44 (0) 1384 276609 |
| Switchboard: | +44 (0) 1384 401312 |
| Fax: | +44 (0) 1384 401451 |
| Email: | testing@fullex-locks.com |
 |
 |
 |
 |
| Mechanical Forces | Weather Testing | Cycle Testing | Soft & Hard Body Testing |